Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigen
„Drum prüfe, wer sich ewig bindet ...“ heißt es in Schillers Glocke. In der High Fidelity stellte sich eine solche Frage bisher nicht. In der Regel ging man zum Händler und tauschte Geld gegen Ware.
>> Mehr erfahren>> Alle anzeigenKategorie: Vollverstärker
Ausstattungsliste: Pathos Acoustics ClassicRemix
| Specification | |
| Type | Integrated stereo amplifier, fully balanced, Hybrid technology. |
| Preamplifier stage | Tube (2x6922 ECC88) |
| Final stage | solid stade, bridge mode, class AB |
| Output Power | 2x70 W RMS @ 8 Ω (Both channel driven) |
| Frequency response | 1,5Hz - 200KHz ± 0,5dB |
| Max input voltage | 4,25VRMS |
| Input sensitivity | 500m VRMS |
| Input impedance | 47K Ω |
| Output polarity | Non- inverting. Balanced pin 2 + |
| Volume regulator | 2 x Burr Brown PGA2310 (180 steps 0,5dB) |
| THD | 0,025% @ 70W |
| S/N Ratio | > 100dB |
| Power requirements | 250W @ 70W PC / 100W @ zero volume / < 0,5W@standby |
| Connections | |
| Analogue inputs | 1 balanced XRL |
| 4 unbalanced RCA | |
| Digital inputs | Installation of (optional) HiDac Mk2 board is required to enable these inputs |
| 1 USB port type "B", 1 SPDIF coaxial, 1 SPDIF optical Outputs | |
| 1 Pre out stereo line | |
| 1 connector for jack headphone 6,3mm | |
| Headpone Specifications | |
| Output power | 1,6W @ 32 Ω |
| Output impedance | 10 Ω |
| Max output level | 10 V RMS |
| Frequency response | 1,5Hz - 200KHz ± 0,5dB |
| THD | 0,025% |
| Dimensions | 37cm (D) x 280cm (W) x 170cm (H) |
| Weight | 14Kg |



