Revox ist 2003 stolze 75 Jahre alt geworden. Alleine das ist schon Grund zum Feiern. Aber Revox hat auch ein besonderes Angebot für Fans, man kann gewissermaßen Mitglied in einem sehr exklusiven Club werden.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Vollverstärker
Ausstattungsliste: Perreaux 150i
Amplifier | |
Rated Power Output (per channel) | 150W into 8Ω |
300W into 4Ω | |
Maximum Power Output (prior to clipping, per channel) | 190W into 8Ω |
310W into 4Ω | |
Total Harmonic Distortion + Noise | Typically: 0.002% @ 1kHz, 150W into 8Ω |
20Hz to 20kHz: less than 0.040%, 150W into 8Ω | |
Frequency Response | 20Hz to 20kHz: +0.00dB, -0.15dB |
5Hz to 60kHz: +0.00dB, -0.50dB | |
Damping Factor | 800 @ 1kHz, 150W into 8Ω |
Signal to Noise Ratio (unweighted) | better than 96dB, ref. 150W |
Preamplifier | |
Input Impedance | Unbalanced 12kΩ |
Balanced 22kΩ | |
Input Overload | Unbalanced 8Vrms |
Balanced 8Vrms | |
Volume Control Range | -95.5dB to +31.5dB |
Volume Control Resolution | 0.5dB per step |
Input Volume Trim Range | ±40dB |
Balance Resolution | 0.5dB |
Balance Range | ±40dB |
éloquence DAC Module Specifications | |
Digital Inputs | 2 SPDIF Coax (BNC) |
2 SPDIF Optical (Toslink) | |
1 USB (Type B) | |
Input Sample Rate | 32, 44.1, 48, 88.2, 96, 176.4, 192kHz (Coax, Optical) |
32, 44.1, 48kHz (USB) | |
Input Word Length (maximum) B) | 24-bit (Coax, Optical) |
16-bit (USB) | |
Input Impedance | 75Ω (Coax) |
Transformer Coupled | Coax: Yes |
Optical: No | |
USB: No | |
Analogue Section | |
Digital to Analogue Conversion | 24-bit / 192kHz |
Output Voltage | 2.0Vrms @ 0dBFS |
Total Harmonic Distortion + Noise | Typically 0.002%, 20Hz-20kHz @ 0dBFS |
Frequency Response | 20Hz to 20kHz: +0.0dB, -0.1dB |
5Hz to 94kHz: +0.0dB, -3.0dB | |
Dynamic Range (unweighted): | better than 115dB @ 0dBFS |
Signal to Noise Ratio (unweighted) | better than 115dB @ 0dBFS |
Channel Separation | better than 110dB @ 0dBFS |
Stop Band | 105kHz |
Stop Band Attenuation | 125dB |
éloquence Phono Module Specifications | |
Input Impedance | Low Gain (MM): 47kΩ |
High Gain (MC): 100Ω | |
Input Capacitance | 22pF |
Gain | Low Gain (MM): 40dB |
High Gain (MC): 60dB | |
Total Harmonic Distortion + Noise | Typically: 0.002% @ 1kHz, low gain setting |
20Hz to 20kHz: less than 0.010%, low gain setting | |
RIAA Accuracy | ±0.5dB, 20Hz-20kHz |
Signal to Noise Ratio (unweighted) | better than 85dB, low gain setting |
Dimensions | |
Width | 426mm (16.8") |
Depth | 344mm (13.5") |
Height | 102mm (4.0") |
Weight | 17kg (37.4lb) |