Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: Vollverstärker
Ausstattungsliste: Teac Grandioso F1
Specifications | |
Speaker output | |
Output | 30W + 30W (8Ohm) 60W + 60W (4Ohm) |
Total harmonic distortion | 0.009% (1kHz, 8Ohm, 30W) |
Frequency response | 10Hz – 150 kHz(+0/−3.0 dB at 1W output) |
S/N ratio (at 30W/8Ohm, JEITA) | ES-LINK Analog, XLR, RCA inputs 103dB PHONO (MM) input 101dB PHONO (MC) input 82dB |
Damping factor | 100 |
Minimum compatible impedance | 4Ohm |
Speaker output connectors | 1 pair (L/R) (screw type) |
Headphone output | |
Output (32, 10% distortion) | 1000mW |
Headphone jack | x 1 |
Inputs | |
Terminals (L/R) | ES-LINK Analog x1 XLR x2 RCA x3 PHONO (MM/MC) x1 |
Input impedance | ES-LINK Analog – (current input) XLR, RCA 10kOhm PHONO (MM) 47kOhm PHONO (MC) 100Ohm |
Gain | |
Preamplifier | 24.5dB (when VOLUME at maximum) |
Power amplifier | 35dB |
Tone controls | |
BASS | ±12dB(63Hz) |
MIDDLE | ±12dB(630Hz) |
TREBLE | ±12dB(14kHz) |
General | |
Power supply | AC 230V 50Hz AC 120V 60Hz AC 220V 60Hz |
External dimensions (WxHxD) (including protrusions) | 445 x 191 x 470mm |
Weight | 30kg |
Accessories | |
Included accessories | Power cord x1 Remote control (RC-1315) x1 Batteries (AAA) x2 Felt pads x4 Owner’s manual x1 Warranty card x1 |