Mit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenEs gibt Lautsprecher und dann gibt es noch die LS3/5A. Sie spaltet sowohl ihre Hörer, als auch die, die sie gar nicht kennen. Warum das so ist? Nun, dafür muss man sich vor allem anschauen und natürlich hören, was sie kann und nicht, was sie nicht kann.
>> Mehr erfahren>> Alle anzeigenKategorie: CD-Player
Ausstattungsliste: Norma Acoustics REVO CDP-1BR
Specification | |
Connections | Line RCA output, XLR Balanced |
Outputs Voltage | 3.0 V RMS (+10 dBV) RCA (at 0 dB), 6.0 V RMS (+16 dBV) XLR(at 0 dB) |
Output Impedance | 200 ohm |
System Frequency Response | 0,0 to 22KHz +/- 0,3 dB (limited from CD standard) |
Analogue Output Filter | 0,0 to 180 kHz +/- 3 dB |
Analogue Stage Frequency Response | 0,0 to 2MHz +/- 3 dB |
Configuration | Solid state |
Oversampling | DF 1706 8 x Digital Filter |
Oversampling Filter | User selectable by Jumper inside from: Sharp & Slow Roll-off filter response. |
D/A Converter | PCM 1704 Multibit 24 Bit D/A converter |
I/V Conversion | I/V Conversion by proprietary topology with discrete component |
Output Stage | Proprietary topology with discrete component, high linearity & low noise |
Supply | 230 V AC / 50 Hz, (100V AC or 115 VAC / 50-60Hz in some country) |
Dimensions (HxWxD) | 75 x 430 x 350 mm |
Weight | 10 Kg |
Note | Integrated CD Player with full remote control |