Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
Vor gut 40 Jahren erblickte der Bausatz „Monitor 1“ der Firma Hifi Sound das Licht der Welt. Wir haben den Bausatz wieder aufleben zu lassen.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Endstufen
Ausstattungsliste: Classé CA-M600
| Specifications | |
| Frequency response | 1 Hz – 100 kHz, -3dB |
| Output power | 600W rms into 8Ω (27.8 dBW) |
| 1200W rms into 4Ω (27.8 dBW) | |
| Harmonic Distortion | <0.002% at 1 kHz balanced |
| <0.004% at 1 kHz single ended | |
| Peak Output Voltage | 226V peak to peak, 80V rms no load |
| 206V peak to peak, 73V rms into 8Ω | |
| Input Impedance | 50kΩ balanced / single ended |
| Voltage gain | 29dB balanced / single ended |
| Input level at clipping | 2.86V rms balanced / single ended |
| Intermodulation Distortion | >100dB below fundamental into 8Ω balanced / single ended |
| >90dB below fundamental into 4Ω balanced / single ended | |
| Signal to Noise Ratio | 120dB at peak output into 8Ω |
| Measurement Bandwidth: 22 kHz | |
| Output impedance | 0.03Ω @ 1 kHz |
| Standby power consumption | < 1W |
| Rated power consumption | 823W @ 1/8th power into 8Ω |
| Width | 17.5” (444mm) |
| Depth | 17.52” (445mm) (excluding connectors) |
| Height | 8.78” (223mm) |
| Gross weight | 100 lb (45.4 kg) |
| Net weight | 88 lb (39.9 kg) |
| Mains voltage | Specified on rear panel |





