698_24855_2
Topthema: Standlautsprecher · Stieb Audio Patos
Die große Reduktion
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigen
688_24832_2
Topthema: Over-Ear-Kopfhörer Loewe leo
Gut gebrüllt, Loewe?
Die oberfränkische Traditionsfirma Loewe hat in ihrer über 100-jährigen Historie viele legendäre HiFi- und TV-Geräte herausgebracht. Doch ein Kopfhörer war nie dabei. Bis jetzt.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Endstufen
Ausstattungsliste: Parasound A 23+
Ausstattung & technische Daten
| Specification | |
| Power Output – Stereo Mode (0.06% THD) | 160 watts x 2, 8 Ω both channels driven |
| 240 watts x 2, 4 Ω both channels driven | |
| Power Output – Stereo Mode (0.9% THD) | 210 watts x 2, 8 Ω both channels driven |
| 300 watts x 2, 4 Ω both channels driven | |
| Power Output – Bridged Mode (0.06% THD) | 500 watts x 1, 8 Ω |
| Bridged 4 Ω operation is not recommended | |
| Power Output – Bridged Mode (0.9% THD) | 600 watts x 1, 8 Ω |
| Bridged 4 Ω operation is not recommended | |
| All Power measurement are at 120 VAC, RMS continuous power, full audio band (20 Hz - 20 kHz) | |
| Current Capacity | 45 amps peak, per channel |
| Slew Rate | > 130 volts per microsecond |
| Frequency Response | 5 Hz - 100 kHz, +0/-3 dB |
| 20 Hz - 20 kHz, +0/-0.25 dB | |
| Total Harmonic Distortion (THD) | < 0.06 % at full power |
| < 0.03 % at typical listening levels | |
| IM Distortion | < 0.04 % |
| TIM | Unmeasurable |
| Interchannel Crosstalk | > 85 dB at 1 kHz |
| > 70 dB at 20 kHz | |
| Input Impedance | Unbalanced: 33 kΩ |
| Balanced: 66 kΩ,(33 kΩ per leg) | |
| Total Gain | 29 dB |
| Input Sensitivity for 28.28 V Output into 8 Ω | Unbalanced: 1 V |
| Balanced: 1 V per leg | |
| S/N Ratio | > 112 dB, input shorted, IHF A-weighted |
| > 107 dB, input shorted, unweighted | |
| Damping Factor | > 800 at 20 Hz |
| DC Trigger Requirements | +9 Vdc to +12 Vdc, 5 mA |
| Audio Trigger Requirement | 2 mV - 10 mV |
| XLR Pin Identification | 1 = Ground (Shield) |
| 2 = Positive | |
| 3 = Negative (Return) | |
| Power Requirement | Standby: <1 Watt |
| Idle (no music playing): 75 Watts | |
| Typical Listening levels: 125 Watts | |
| Maximum: 800 Watts | |
| 110-125 VAC 60 Hz or 220-250 VAC 50 Hz | |
| AC mains voltage is set on rear panel | |
| Dimensions | Width: 17-1/4" (437 mm) |
| Depth: 15"-1/4" (388 mm) | |
| Depth, with cables 17" (432 mm) | |
| Height, with feet: 4-1/8" (105 mm) | |
| Height, without feet: 3-1/2" (89 mm), 2U | |
| Net Weight | 27 lb. (12.2 kg) |
