Möchten Sie zur Seite für Mobilgeräte wechseln ? JaNein
Topthema: Raumakustik verbessern - Schallabsorber einsetzen

Kategorie: Vollverstärker

Ausstattungsliste: Mitchell & Johnson SAP-201V

Ausstattung & technische Daten
Inputs 4 RCA analog inputs for CD, Netplayer, TV and Aux allowing for all potential input needs. Plus a phono stage for a turntable with Moving Magnet cartridge.
PLUS 3.5mm Line-In jack on front panel for MP3 player or other portable sound source.
COAX and Optical digital inputs allowing two digital sources to be connected.
Outputs 4mm banana plug brass speaker terminals with plastic screw threaded tension nuts for bare-wire connection to loudspeakers.
Record out circuit for connection to a slave amplifier or active speaker.
Front panel ¼ inch headphone socket.
Rated Output Power Rated Output Power 40 W at 8 ohms, 2 ch driven, 1 kHz, 0.8 % THD (IEC)
50 W at 4 ohms, 2 ch driven, 1 kHz, 0.8 % THD (IEC)
Dynamic Power 150W
THD (Total Harmonic Distortion) 0.08 % (1 kHz 1 W)
Damping Factor 60 (Front1 kHz8 )
Input Sensitivity and Impedance 250 mV/47 k(LINE)
6.5 mV/47 k(PHONO)
Output Level and Impedance 250 mV/47k(REC OUT)
Phono Overload 60 mV (MM 1 kHz 0.5 %)
Frequency Response 20 Hz-50 kHz/+1 dB-3 dB (LINE)
+14 dB, -14 dB, 100 Hz (BASS)
Tone Control +14 dB, -14dB, 10 kHz (TREBLE)
+0 dB, -14 dB (BALANCE)
Signal to Noise Ratio >85dB (LINE, IHF-A) 61 dB (PHONO, IHF-A)
Speaker Impedance 4 ohm, 8 ohm, 16 ohm
Digital Inputs OPTICAL 1 (Rear)
COAXIAL 1 (Rear)
Digital to Analog Converter Wolfson Micro WM8761 upto 24 bit 192kHz sampling rate
Analog Outputs REC OUT
Headphones 1 x 1/4" (FRONT)
Power Supply AC 230V, 50/60 Hz toroidal audio grade PSU
Power Consumption Max 250W
Dimensions (WxHxD) 430 x 80 x 283 mm
Weight 6.3 kg