Von Audio System gibt es eine Vielzahl an Nachrüstlautsprechern für Audi. Wir schaffen den Überblick und testen das RFIT Set für den A6 C8.
>> Mehr erfahren>> Alle anzeigenMit diesen Chassis wollte ich schon immer mal etwas bauen. Dass ich sie allerdings jemals zusammen in einer Box haben würde, hätte ich dann doch wieder nicht erwartet – dass das Ganze so gut werden würde, dann schon eher.
>> Mehr erfahren>> Alle anzeigenKategorie: Vollverstärker
Ausstattungsliste: Pathos Acoustics InPolRemix MkII
Specification | |
Type | Stereo integrated amplifier Pure class A - double INPOL technology - fully balanced - digital Bias/gain set technology |
Output power | 2 x 25W@ 8 Ohm |
2 x 38W@ 4 Ohm | |
Frequency response | 2Hz – 150KHz ± 0.5db |
Input sensitivity | 470mVRMS |
Input impedance | 47KOhm |
Output polarity | Selectable by remote control |
Volume regulator | 2 x Burr Brown PGA2310 (180 steps 0,5dB) |
THD | 0,1% @ 25W |
S/N Ratio | > 100dB |
Gain 31 db Unbalanced 37 db Balanced | |
Output impedance 0,9Ω | |
Connections | |
Analogue inputs | 1 Balanced XRL line |
4 unbalanced RCA line | |
Digital inputs | Installation of (optional) HiDac Mk2 board is required to enable these inputs |
1 USB port type “B” | |
1 SPDIF coaxial | |
1 SPDIF optical | |
Outputs | 1 Pre out stereo line RCA |
1 Pre out stereo line Balanced XLR | |
Pre-output phase can be selected | |
1 connector for jack headphone 6,3mm | |
Headphone Specification | |
Output power | 2,65W @ 32 Ω |
Output impedance | 0,45Ω |
Max output level | 9,6 VRMS |
Frequency response | 2Hz - 400KHz ± 0,5db |
THD | 0,025% |
Dimensions | |
Amplifier | 370mm (D) x 280mm (W) x 180mm (H) |
Weight | 13,5Kg |