Vor gut 40 Jahren erblickte der Bausatz „Monitor 1“ der Firma Hifi Sound das Licht der Welt. Wir haben den Bausatz wieder aufleben zu lassen.
>> Mehr erfahren>> Alle anzeigen
„Drum prüfe, wer sich ewig bindet ...“ heißt es in Schillers Glocke. In der High Fidelity stellte sich eine solche Frage bisher nicht. In der Regel ging man zum Händler und tauschte Geld gegen Ware.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Endstufen
Ausstattungsliste: Anthem P5
| GENERAL | |
| Inputs | 5 Single-Ended, 5 Balanced, 1 Relay Trigger (3.5 mm Mono Jack) |
| Outputs | 5 Pairs Speaker Binding Posts, 1 Relay Trigger (3.5 mm Mono Jack) |
| THD+N (225 W into 8 Ω) | 0.0007% at 1 kHz, 0.008% at 20 kHz |
| IMD | 0.00019% (CCIF, 325 W into 8 Ω) |
| Power Bandwidth | 10 Hz to 150 kHz (+0 -3 dB, 325 W into 8 Ω) |
| Frequency Response | 20 Hz to 20 kHz (+0 -0.15 dB), 5 Hz to 100 kHz (+0 -2 dB) |
| Input Sensitivity (RCA and XLR 0 dB inputs) | 1 Vrms in for 28.3 Vrms out (100 W into 8 Ω) |
| Input Impedance | 18 kΩ (RCA), 22 kΩ (XLR) |
| Damping Factor | >600 at 20 Hz, 400 at 1 kHz (ref. 8 Ω) |
| S/N Ratio | 125 dB, A-weighted (ref. 325 W) |
| Crosstalk (between any two channels) | -140 dB (20 Hz), -80 dB (20 kHz) |
| Voltage Gain | 29 dB |
| Slew Rate | 40 V/µs |
| SWITCHES | |
| Front Panel | Power (On/Off) |
| Rear Panel | On/Off Modes (Trigger, Manual, Auto), Inputs (RCA, XLR, XLR -6dB) |
| POWER OUTPUT | |
| Impedance 8Ω of Channels Driven | 1: 325 W |
| All: 325 W | |
| Impedance 4Ω of Channels Driven | 1: 500 W |
| All: 500 W | |
| Impedance 2Ω of Channels Driven | 1: 675 W |
| All: 675 W | |
| POWER REQUIREMENTS | |
| Supply Voltage | 105 to 130 V, 60 Hz |
| Power Consumption | 2 x 1800 W |
| DIMENSIONS | |
| Height | 9-3/8 inches (23.8 cm) including feet |
| Width | Faceplate 19-1/4 inches (49 cm) |
| Chassis 17-1/4 inches (43.8 cm) | |
| Depth | 22-1/2 inches (57.2 cm) including handles |
| Weight (unpacked) | 130 lb (59 kg) |





