Das Thema Kabel ist nicht unumstritten. Dabei kann man es ganz pragmatisch angehen: Gute Kabel ausprobieren und fertig.
>> Mehr erfahren>> Alle anzeigen
Man nehme einen Breitbänder, ein Gehäuse und lasse im Grunde alles weitere weg. Heraus kommt wahrscheinlich ein Lautsprecher, der nicht besonders gut klingt. Es sei denn, man weiß, was man tut.
>> Mehr erfahren>> Alle anzeigenKategorie: Verstärker Endstufen
Ausstattungsliste: Parasound ZoneMaster 450
| Specification | |
| Power Output RMS, All Channels Driven (20 Hz - 20 kHz) | 50 watts x 4 @ 8Ω |
| 90 watts x 4 @ 4Ω or 2Ω | |
| 160 watts x 2 @ 8Ω (Bridged) | |
| 200 watts x 2 @ 4Ω (Bridged) | |
| Frequency Response | 10 Hz - 60 kHz, +0/-3 dB |
| Total Harmonic Distortion | < 0.05% at typical listening levels |
| < 1.0% at full power | |
| Interchannel Crosstalk | 70 dB at 20 kHz |
| Input Sensitivity | 700mv = Full output (50 Watts @ 8 Ω) |
| Total Gain = 29 dB (Level controls set to Maximum) | |
| S/N Ratio | > 112 dB, input shorted, IHF A-weighted |
| DC Trigger Requirements | +9 Vdc to +12 Vdc, 2 mA |
| Audio Trigger Requirements | 2 mV Audio Signal |
| AC Power Requirement | 500 Watts Maximum |
| 30 Watts Typical | |
| 15 Watts Idle (All Zones on) | |
| 7.5 Watts Idle (One Zone on) | |
| 0.9 Watts Standby | |
| 110-130 VAC 60 Hz or 220-255 VAC 50 Hz | |
| Note: AC mains voltage is set only by qualified electronics technician. | |
| Dimensions | Width: 8.5" (220 mm) |
| Depth: 10" (254 mm) | |
| Height, with feet: 2" (51 mm) | |
| Height, without feet: 1.75" (45 mm), 1U | |
| Net Weight | 4.5 lbs (2.0kg) |




